HOW TO USE 2-1/4 PRESSURE POTS PROPERLY

WARNING: Always release the pot¡¦s air pressure PRIOR to opening the lid. The pressure pots (tank-25n and tank-26n) might explode if you do not release the pot¡¦s air pressure prior to opening the lid, which will cause substantial injuries to you and others nearby.

ƒÞ To release the pot¡¦s air pressure, use relief valve (left turn the screw) and the safety valve (pull up the o ring). Both of these valves can be found on the top of the lid. (see parts break down attached with pot)

ƒÞ Always keep the relief valve and safety valve CLEAN at all times.

ƒÞ Always check and make sure that the two valves are in working condition when the air pressure reaches 5 PSI before increasing the pressure any further.

ƒÞ DO NOT attempt to repair the safety valve. If the safety valve does not work as it should, replace it with new one by calling your distributor or contact us at 1-800-418-3921

Printable Version of the DISCLOSURE AND ACKNOWLEDGEMENT - HOW TO USE 2-1/4 PRESSURE POTS PROPERLY